Industrial Pallet Rack Engineering and Storage Design
Technical Load Specifications

Pallet Rack Capacity Charts

Certified beam and upright load ratings calculated in compliance with RMI & ANSI MH16.1 design standards for maximum warehouse safety and efficiency.

Engineering Rigor & Compliance

RMI & ANSI MH16.1 Design Principles

At CR Industrial Racks & Storage Co., all pallet racking components are engineered in strict accordance with the latest Rack Manufacturers Institute (RMI) specifications and the American Iron and Steel Institute (AISI) Cold-Formed Steel Design Manual. Our structural and roll-formed racking profiles undergo rigorous testing to ensure uniform load distribution, structural integrity, and long-term durability in demanding logistics environments.

Uniform Load Rating (Per Pair)

Beam capacities are expressed in total pounds per pair of step or structural beams, assuming evenly distributed weight across both beams.

Deflection Standards (L/180)

Maximum allowable deflection under full rated load is restricted to beam clear span length divided by 180, preventing operational deflection issues.

Seismic & Lateral Factor Analysis

Upright frame load tables account for axial vertical forces. High-seismic design requirements (such as the Código Sísmico de Costa Rica) are coordinated individually.

Structural Data

Pallet Rack Beam Capacity Charts

Review standard load capacities for roll-formed step beams and C-channel structural beams. Ensure safety factors match your pallet weight and clear beam span.

Beam Length (Inches) Beam Profile & Gauge RMI Rated Capacity (Lbs/Pair) Recommended Pallet Configuration
48" (4 ft) 3.56" x 48" L – 16 Gauge 7,991 lbs Single Heavy Pallet / Special Tooling
60" (5 ft) 3.56" x 60" L – 16 Gauge 6,544 lbs Specialty Wide Pallet Storage
72" (6 ft) 3.56" x 72" L – 16 Gauge 5,573 lbs Two 36" Wide Pallets
96" (8 ft) 2.50" x 96" L – 16 Gauge 2,126 lbs Light Duty - Two 40" x 48" Pallets
96" (8 ft) 3.56" x 96" L – 16 Gauge 3,972 lbs Standard Duty - Two 40" x 48" Pallets
96" (8 ft) 4.18" x 96" L – 16 Gauge 5,296 lbs Heavy Duty - Two 40" x 48" Pallets
96" (8 ft) 6.00" x 96" L – 14 Gauge 9,897 lbs Extra Heavy Duty / Liquid Storage
108" (9 ft) 4.18" x 108" L – 16 Gauge 4,431 lbs Standard Duty - Two 48" x 48" Pallets
108" (9 ft) 6.00" x 108" L – 14 Gauge 8,842 lbs Heavy Duty - Three 32" x 48" Euro Pallets
120" (10 ft) 4.50" x 120" L – 16 Gauge 4,254 lbs Standard Duty - Three 36" Pallets
120" (10 ft) 6.00" x 120" L – 14 Gauge 7,997 lbs Heavy Duty - Three 36" Pallets
144" (12 ft) 6.00" x 144" L – 12 Gauge 8,979 lbs Heavy Duty - Three 40" x 48" Pallets

* Capacities include a 12.5% impact allowance for standard forklift placement. For 3-pallet wide shelves, apply a 0.95 multiplier factor. Roll-formed beams exceeding 150" clear span require lateral ties.

Beam Length Profile C3 x 3.5# (No Tie) Profile C3 x 3.5# (W/ Tie) Profile C4 x 4.5# (No Tie) Profile C4 x 4.5# (W/ Tie) Profile C5 x 6.7# (W/ Tie)
48" 12,593 lbs 12,858 lbs 16,000 lbs 16,000 lbs 16,000 lbs
72" 7,577 lbs 8,680 lbs 10,801 lbs 14,074 lbs 16,000 lbs
96" 4,777 lbs 5,068 lbs 6,904 lbs 10,263 lbs 15,871 lbs
108" 3,821 lbs 4,070 lbs 5,541 lbs 8,493 lbs 12,344 lbs
120" 3,132 lbs 3,345 lbs 4,417 lbs 6,928 lbs 9,877 lbs
144" 2,220 lbs 2,379 lbs 3,070 lbs 4,865 lbs 6,729 lbs

* Structural channel beams provide high impact resistance against forklift damage. Structural beams longer than 108" require lateral ties to maintain rated capacity.

Upright Frame Analysis

Pallet Rack Upright Frame Capacities

Maximum allowable column loads are governed by the maximum unsupported length (the vertical distance from floor to the top of the first beam elevation or maximum beam spacing).

Max Unsupported Length 3" x 1-5/8" (14 Gauge) 3" x 3" Open (14 Gauge) 3" x 3" Open (13 Gauge) 3" x 3" Open (12 Gauge) 3" x 3" Closed SuperPost (12 Ga)
36 Inches 17,028 lbs 23,323 lbs 32,722 lbs 42,237 lbs 51,476 lbs
48 Inches 13,234 lbs 19,030 lbs 26,028 lbs 32,983 lbs 46,644 lbs
60 Inches 10,650 lbs 15,902 lbs 21,347 lbs 26,684 lbs 34,747 lbs
72 Inches 8,295 lbs 12,927 lbs 17,035 lbs 21,007 lbs 26,519 lbs
84 Inches 6,441 lbs 10,249 lbs 13,315 lbs 16,263 lbs 19,582 lbs
96 Inches 5,113 lbs 8,269 lbs 10,628 lbs 12,893 lbs 14,993 lbs

Note: All table values assume undamaged racks installed plumb with anchor bolts secure in floor slab minimum 3,000 PSI concrete. If frame load exceeds 31,000 lbs, heavy-duty frame bracing is required.

Engineering Safety Guidelines & Frame Load Rules

  • Pure Gravity Axial Loading: Load table figures apply to purely axial gravity loading. Eccentric loading or un-symmetrical beam placements reduce column capacity.
  • Base Plate & Anchor Verification: Every upright must be anchored with approved wedge expansion or screw anchors into reinforced concrete slabs.
  • Rack Damage Protocol: Deflected or impacted columns lose load-carrying capacity rapidly. Damaged posts must be protected with column guards or restored using certified bolt-on repair kits.
  • Height-to-Depth Ratio: Single rows exceeding a 6:1 height-to-depth ratio require engineered floor anchoring calculation against seismic overturning.

Need Custom Rack Capacity Calculations?

Contact CR Industrial Racks & Storage Co. for certified engineering drawings, seismic design support, and heavy-duty storage planning.

Get Catalog